It is no longer a legal requirement, to wear face masks in shops. However, it would be appreciated, if those with "Flu like" symptoms postpone their visits. Despite the relaxing of restrictions, only one customer (Or party), at a time, is allowed to enter the shop. Please wait by the gate, if there is someone in the shop when you arrive (Or join queue if already formed).

Shimano
Select by Category





These are the splined Shimano bottom bracket sets. They are the long spline variety, used with Claris and Alivio type chainsets. They were also used on pre Hollowtech 2/Capless Deore, Deore LX, XT (Not XTR) and Tiagra/Sora systems.

These are the splined Shimano bottom bracket sets. They are the short spline variety, that was found on road (105 and above) and Shimano XTR bottom brackets sets, in the pre Hollowtech 2/Capless days.



ATB brake levers are sold in pairs.


Disc brake kits are sold per end. ie Front or rear.


ATB V brake callipers are sold per end. ie Front or rear.

Disc brake pads are sold in pairs. ie Enough for 1 wheel.

Road brake callipers are sold in pairs unless stated otherwise.

Road brake levers are sold in pairs. See ''Gear shifters'' for STI levers.



Cables are full length & suitable for front & rear use.

Outer cable is supplied by the metre at the price shown.


Outer cable is supplied by the metre at the price shown.


Standard gear inner cables are full length & suitable for front or rear use.

















Chainrings for Shimano road double chainsets are 130mm PCD.
The rings are located by 5 chainring bolts.
They are split into Types ''A or B'' according to the size of inner chainring.
Type ''A'' inner chainrings have 42 teeth, whilst Type ''B'' inner chainrings have 39.
Outer chainrings should be matched to the inner ring type in order to maintain maximum shifting efficiency.
For 52T A Type chainrings, see triple section, part number 16T 9A52.


Chainrings for Shimano road chainsets are 130mm PCD for the outer rings & 74mm for the inner.
The rings are located by 5 chainring bolts.

Note - Road 10 speed chains are narrower than 10 speed ATB chains!

10 speed chains are not compatible with 9 speed systems.















Best suited to 10 speed systems, though compatible with 9 speed systems but not 7/8.






All gear hangers, even new ones, should be fitted in conjunction with a rear gear hanger alignment tool. Click here for more details.
































Shimano 10 speed rear gears are compatible with 8, 9 & 10 speed gear systems.

Shimano 10 speed rear gears are compatible with 8, 9 & 10 speed gear systems.












If you cannot see your cone listed, see https://si.shimano.com/en/#/ and if it is no longer available, see from Shimano http://wheelsmfg.com/products/all-cones.html.rnrnCone adjustment is made much easier if done with the aid of an axle vice.

If you cannot see your cone listed, see [url]http://si.shimano.com/#/[/url] and if it is no longer available, see from Shimano http://wheelsmfg.com/products/all-cones.html.
Cone adjustment is made much easier if done with the aid of an axle vice.



SPD pedals are supplied with cleats.

SPD SL pedals are supplied with cleats (Not fixed type).


See ''Ball Bearing'' section for pedal bearings under
''Accessories''.



Shop with confidence.
We have placed cookies on your browsing device to enable this website to function correctly.
Further usage of this website indicates you are happy for us to do this..
Find out about the cookies we have set and how we use them.
Further usage of this website indicates you are happy for us to do this..
Find out about the cookies we have set and how we use them.